Filter
Top Products
43
Listening to the Radio
There are two ways to select radio stations:
• Manual tuning
• Presetting radio stations then selecting the preset channels
1 Select the TUNER input.
2 Select the broadcast band.
Each press changes the band.
→ FM
AM
3 Select a tuning mode. (FM only)
Each press switches the mode.
→ AUTO (Auto mode)
MONO (Monaural mode)
When the 1/¡ buttons are pressed in AUTO mode, a station
will be tuned in automatically and tuning will stop. Stereo
reception will be made automatically when a stereo broadcast
with sufficient signal strength is received.
4 Select a station.
“AUTO” mode (auto tuning) (FM only)
Press the 1/¡ button on the remote controller or press and
hold the 4/¢ button on the main unit to receive the next
tuned station automatically.
“MONO” mode (manual tuning)
When the 1/¡ button is pressed and held continuously on the
remote controller, the frequency changes continuously. When
the button is released, the frequency stops changing. Each
time the 1/¡ button is pressed, the frequency changes one
step.
When the TUNING/PRESET button is pressed and held
continuously on the main unit, the frequency changes
continuously. When the button is released, the frequency stops
changing and the selected frequency blinks. Each time the
TUNING/PRESET button is pressed while it is lit, the
frequency changes one step.
Use the manual tuning mode when reception is noisy due to
weak reception. (In the manual mode, stereo broadcasts are
received in monaural.)
Tuning Manually
™ TUNING/PRESET £
7 INPUT SELECTOR
MEMORY
7
AM/FM
1/¡
TUNER PRESET
Main unit Remote controller
Remote controller
Remote controller
Remote controller
Main unit
Remote controller
Main unit
Lights up in the
AUTO mode
Band
Frequency
EN00_L-MS30.book Page 43 Tuesday, September 2, 2003 4:19 PM