Filter
Top Products
8
First Things First
Start Putting The Dish Together
You won’t completely assemble the dish in this section, but you
will begin the assembly procedure.
1. Locate the satellite dish, the four self-locking nuts and four
star washers that came in the hardware packet.
2. Place the dish on the LNB support arm by passing the four
bolts on the back of the dish through the four holes on the
support arm.
3. Attach the dish to the support arm as shown, using the four
self-locking nuts and star washers. Use a 7/16" wrench to
tighten the nuts.
4. Set the dish aside.
1-3