Filter
Top Products
42
Testing the System
Disconnecting Test Components
Do not skip this step! Now that you know your components
are working, and you have a clear idea of how to connect the
system, you’ll need to follow a different procedure to make a
permanent connection.
You don’t need to disconnect all the components, just those that
require other steps to ensure that the installation will be stable
and permanent.
1. Turn off and unplug all components in your system (TV, DSS
®
receiver, etc.)
2. Disconnect the coaxial cable from the SATELLITE IN jack on
the DSS
®
receiver.
3. Use a screwdriver to remove LNB’s screw and hex retainer.
Carefully slide the LNB out of the LNB support arm.
4. Disconnect the coaxial cable from the LNB.
5. Push the coaxial cable through the LNB support arm and
mast to remove it.
6. Remove the LNB arm assembly from the mast.
7. Remove the mast from the temporary stand.