Filter
Top Products
English _27
● STARTING WEB VIEWER
CONNECTING WEB VIEWER
1. Open your web browser and type the IP address or URL of
NVR into the URL address box.
M
` “192.168.1.200” is set to IP by default.
` Set to an available IP address in IP Installer or "Network >
Connection Mode”.
` The URL connection will be enabled only when the DDNS connection settings have been completed.
2. A user with the admin permissions should provide the admin
ID and password. A registered user should provide the user
ID and password.
J
` The default password can be exposed to a hacking thread so it is
recommended to change the password after installing the product.
` Set password for your wireless network if you use the product with a wireless router. Being not protected with password or
using the default wireless router password may expose your video data to potential threat.
` Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
M
` It allow s up to 10 simultaneous access including the Admin and general users.
` It does not allow multiple login of the Admin user.
` The default ID of the admin account is “admin”, and the default password is “4321”.
` Password of the Admin and general users can be changed in <Permission Management> menu of the NVR.
` All settings are applied by the NVR’s settings.
3. Click <Install ActiveX Control...>.
4. When the installation confirm message appear, click [Yes]
button.