Filter
Top Products
34_ live viewer
live viewer
LIVE SCREEN CONFIGURATION
System Status
You can check the status or operation of the NVR with the icons on the live screen.
Menu Description
a
System
Operation
Displayed if there is a problem with the cooling fan.
HDD
Displayed if the HDD needs a technical examination.
Displayed if no HDD is installed or the existing HDD should be replaced.
Displayed if the HDD is full and the NVR has an insufficient space to
record.
Record
Appears when it is being recorded.
This is displayed if some channels will be recorded only on key frames
because the entire recording data size is over 100Mbps. (Page 70)
Displayed if a new firmware is found from the network.
Appears when recording is limited due to network overload.
b
Video Input
Status
Displayed if you press the Pause button.
Displayed in Auto Sequence mode where all channels are switched at the specific time
interval.
Displayed if no input is entered in the condition that the camera is set to <ON>.
Displayed if no permission to live view is granted.
If your camera is turned <OFF> or in <Covert> mode, nothing is displayed on screen.
a
b
CAM 01