Filter
Top Products
68_ menu setup
menu setup
HDD Alarm Setting
You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and
its duration.
•
Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm
output port.
•
Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified
alarm output port.
•
Duration : Sets the alarm duration for the alarm signal and beep sound.
-
Check Alarm, Replace Alarm signals will output through the selected alarm out ports (1, 2, 3, and 4).
-
If <BEEP> was selected, a beep will sound.
-
If <All> was selected, both beep sound and alarm signal through rear side ports will output.
M
` <Check> status means that the HDD is operating but it has problems that require technical examination.
(
) appears on the Live screen.
` <Replace> status means that the HDD has defect and requires immediate replacement.
( ) appears on the Live screen.