Filter
Top Products
English _75
● MENU SETUP
Video loss detection
You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to
unstable network connection.
•
Video Loss State : Specify the use of video loss detection.
•
Alarm Out : Select an alarm output method.
•
Alarm Duration : Specify the duration of the alarm output with the beep.
Alarm Out Schedule
You can set the conditions and operating hours for scheduled alarms.
•
Alarm Out : Sets the alarm output method.
` For further information on alarm output, refer to "HDD Alarm Setting". (Page 68)
-
<ON> : Marked in green, and always generates alarm on scheduled time.
-
<OFF> : Marked in black, no alarm is generated even if an event occurs.
-
<Event Sync> : Marked in orange, generates alarm only when an event occurs.
•
Apply to All : Applies the configured schedule to all alarms.
` For more information about how to set time, refer to “To set the recording schedule”. (Page 69)
M
` When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.