Filter
Top Products
PLAYING BACK IMAGES RECORDED IN THE NORMAL
RECORDING AREA
Selecting a camera image channel for playback
When the digital video recorder has been connected to a multiplexer (sold separately) and camera images have been recorded, you can specify
the channel (camera number) for the images recorded and play them back.
Press the CHANNEL button while playback is paused.
The screen for selecting the camera number for cameras connected to the
multiplexer appears.
Use the jog dial to specify the channel (example: camera
4).
Turn the shuttle dial clockwise.
“c” appears in the operating display, and playback of images from the
specified channel starts.
Note:
•
If the digital video recorder is not connected to a multiplexer that allows
decoding of channel information (camera numbers), channels can not be
specified for playback.
•
When this operation is carried out, only the specified channel is played
back, and so other channels are not displayed.
•
When a channel is selected, the multiplexer title information and date
information may not be fully displayed in some cases.
Switching between frame and field playback
Press the SEARCH FRAME/FIELD button while frame
recording images are being played back.
The screen changes between frame and field playback each time the button
is pressed.
Note:
•
Switching between frame and field playback is only possible when images
that have been recorded in frame mode are being played back.
•
When playing back of frame recording images that contain rapid
movement, instability may occur in the images.
CHANNEL
1
PLEASE SELECT CHANNEL
-- CHANNEL
CHANGE WITH JOG. SET WITH SHUTTLE
2
PLEASE SELECT CHANNEL
4 CHANNEL
CHANGE WITH JOG. SET WITH SHUTTLE
3
CH4
27-10-01
13:38:33 SF 0.03SEC
SEARCH
FRAME/FIELD
1
22
English