Sanyo DSR-3000P DVR User Manual


 
SPECIFICATIONS
Hard disk capacity : 80 GB (Installation of additional hard disk 80 GB (sold separately) possible)
Television System : Based on PAL colour signal standard
Picture Resolution : 720 x 288 (Field),720 x 576 (Frame)
Compression : M-JPEG
Picture Quality : 5 Levels (Basic, Normal, Enhanced, Fine, Super Fine)
Recording Type : Frame or Field Recording
Recording Speed : 27 Levels.
Recording Area : Normal Recording Area, Alarm Recording Area, Archive Area
Playback : Playback, Still, Search
Zoom : 2 Times Zoom Function
Search Mode
Time/Date Search : Search by time and date
Alarm Search : Search by alarm event list
Alarm Thumbnail Search : Search by alarm event thumbnails
Archive Area Search : Search Archive Area with event list
Smart Motion Search : Search by specifying a motion sensor
Menu Language : English/French/German/Spanish
Video input terminal : 1.0 Vp-p/75 , unbalanced, BNC x 1
S- video input terminal : Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.300 Vp-p/75 , unbalanced
Digital input terminal : RJ-45 x 1
Digital SUB input terminal : RJ-45 x 1
Audio input terminal : 8dBs, 27 k unbalanced, RCA pin jack x 1
Microphone input terminal : 60dBs 10k unbalanced, 3.5mm mini jack
Video output terminal : 1.0 Vp-p/75 , unbalanced, BNC x 1
S- video output terminal : Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.300 Vp-p/75 , unbalanced
Loop out terminal : 1.0 Vp-p/75 , unbalanced, BNC x 1
S- video loop out terminal : Separate YC signals, DIN connector (S terminal) x 1
Y signal: 1.0 Vp-p/75 , unbalanced, synchronous; C signal: 0.300 Vp-p/75 , unbalanced
Digital output terminal : RJ-45 x 1
Digital SUB output terminal : RJ-45 x 1
Audio output terminal : 8dBs, 600 unbalanced, RCA pin jack x 1
Compact Flash Slot : Compact Flash Type 2 (Front)
PC Card Slot : PCMCIA Type 2 (Rear) for SCSI or Ethernet card
RS-232C terminal : D- SUB 9pin (for PC)
Control connectors
RS-485 terminal : Push lock (3 terminals: A, B, C (GND))
Remote Control terminal : 1 input for resister alley switch
Alarm in terminal : 1 input (Normal Open Low level active)
Alarm out terminal : 1 output (Normal 5V Low level active)
Alarm reset terminal : 1 input (Normal Open Low level active)
SW out terminal : 1 output (Normal 5V Low level active)
NON Rec out terminal : 1 output (Normal 5V Low level active)
Clock Adjust in terminal : 1 input (Normal Open Low level active)
Clock Adjust out terminal : 1 output (Normal 5V Low level active)
Warning out terminal : 1 output (Normal 5V Low level active)
Disk Full out terminal : 1 output (Normal 5V Low level active)
Alarm Full out terminal : 1 output (Normal 5V Low level active)
Power : AC 220 240 V, 50 Hz
Power consumption : 27 W 260 mA
Operating environment : Temperature: 5°C to 40°C, Humidity: 10 to 80%
Dimensions : 420 (W) x 86 (H) x 364.5 (D) mm
Weight : Approx. 5.5 kg
Products are subject to change in design and specifications without notice and without incurring any obligation.
72
English