Filter
Top Products
SECURITY LOCK SET SETTING
7
Use the jog dial to change the setting to “ON”, and then
turn the shuttle dial clockwise.
The cursor moves to USER.
8
Set User password.
Carry out
B User password setting. If the User setting is
not to be done, this is complete.
Use the jog dial to move the cursor to REC CONTROL and
carry out the recording and playback operating privilege
setting. (See page 63.)
Note: If setting a 4-character password, leave the 5th character as
"-" and then turn the shuttle dial clockwise.
B
User password setting
Example: To set the password to “AB123456”
1
Use the jog dial to move the cursor to USER, and then
turn the shuttle dial clockwise.
The first password entry bar flashes.
2
Use the jog dial to display “A”, and then turn the shuttle
dial.
The second password entry bar flashes.
•
The characters that can be used in the password are: 0, 1,
... 9, A, B, C, ... Z
3
Use the jog dial to display “B”, and then turn the shuttle
dial.
The third password entry bar flashes.
4
Repeat this procedure to continue entering “123456”, and
then turn the shuttle dial clockwise.
The cursor moves to “OFF” and flashes.
5
Use the jog dial to change the setting to “ON”, and then
turn the shuttle dial clockwise.
The cursor moves to REC CONTROL.
Carry out the recording and playback operating privilege
setting. (See page 63.)
<SECURITY LOCK>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER -------- OFF
REC CONTROL : ADMIN
USER -------- OFF
USER A------- OFF
USER AB------ OFF
<SECURITY LOCK>
LEVEL PASSWORD(4-8) USE
ADMIN 123456AB ON
USER AB123456 OFF
REC CONTROL : ADMIN
<SECURITY LOCK>
LEVEL PASSWORD(4-8) USE
ADMIN -------- OFF
USER AB123456 ON
REC CONTROL : ADMIN
62
English