Filter
Top Products
NETWORK SET SETTING
6
Turn the shuttle dial clockwise and use the jog dial to
select network control (example: “ON”), and then turn the
shuttle dial clockwise.
The cursor moves to IP ADDRESS.
Note:
•
Control through the network is not possible unless NETWORK
CONTROL is ON.
When you are connected to a network, it should be switched
OFF if control from the network is not required.
•
If DIGITAL SERIES RECORDING in the RECORDING
CONDITIONS SET menu is set to “ON”, NETWORK CONTROL
cannot be set to “ON”.
7
Turn the shuttle dial clockwise and use the jog dial and
shuttle dial to display the IP ADDRESS (example:
“192.168.0.1”), and then turn the shuttle dial clockwise.
With the final shuttle dial movement, the cursor moves to
SUBNET MASK.
8
Turn the shuttle dial clockwise and use the jog dial and
shuttle dial to display the SUBNET MASK (example:
“255.255.255.0”), and then turn the shuttle dial clockwise.
With the final shuttle dial movement, the cursor moves to
GATEWAY.
9
Turn the shuttle dial clockwise and use the jog dial and
shuttle dial to display the GATEWAY (example:
“192.168.0.1”), and then turn the shuttle dial clockwise.
With the final shuttle dial movement, the cursor moves to ID1
under PASSWORD SETTING.
Note: When connecting this unit to a network, check the IP
ADDRESS, SUBNET MASK and GATEWAY settings with
the LAN Network Administrator.
PASSWORD SETTING setting
For network connection there are three access levels, each of
which has a password. Each password can consist of a
combination of 4 to 8 alphanumeric symbols.
Note: The cursor cannot be moved to ID or PASSWORD (4-8).
Example: Set AB123456 as the ID1 password.
1
Use the jog dial to move the cursor to ID1, and then turn
the shuttle dial clockwise.
The initial digit 1 of the password entry flashes.
•
The characters that can be used in the password are: 0, 1
... 9, A, B ... Z
Note:
•
ID1: This level can only observe a live image through the
network.
•
ID2: This level can observe a live image and play back and
search recorded images through the network.
•
ID3: This level allows all digital video recorder operations and
settings to be carried out.
2
Use the jog dial to display “A”, and then turn the shuttle
dial.
The second digit 1 flashes.
3
Use the jog dial to display “B”, and then turn the shuttle
dial.
The third digit 1 flashes.
<NETWORK SET>
LAN CARD : LAN1
NETWORK CONTROL : ON
IP ADDRESS : 192.168. 0. 1
SUBNET MASK : 255.255.255. 0
GATEWAY : 0. 0. 0. 0
PASSWORD SETTING
<NETWORK SET>
LAN CARD : LAN1
NETWORK CONTROL : ON
IP ADDRESS : 192.168. 0. 1
SUBNET MASK : 255.255.255. 0
GATEWAY : 0. 0. 0. 0
PASSWORD SETTING
<NETWORK SET>
LAN CARD : LAN1
NETWORK CONTROL : ON
IP ADDRESS : 192.168. 0. 1
SUBNET MASK : 255.255.255. 0
GATEWAY : 0. 0. 0. 0
PASSWORD SETTING
PASSWORD SETTING
ID : PASSWORD (4-8)
ID1 : 1111----
ID2 : 2222----
ID3 : 3333----
ID1 : A111----
ID1 : AB11----
English
65