Filter
Top Products
SEARCHING FOR RECORDED IMAGES
Motion detection search
When a motion sensor is set for images recorded in the normal recording area (normal recording and timer recording images) or for images
recorded in the alarm recording area of the hard disk, you can search for images that have changed because of the entry of a suspicious
person, for instance, and play back only those images.
Note:
•
If carrying out motion detection searches of multiplexer images, change the setting for MULTIPLEXER in the VIDEO INPUT SET menu to
something other than “NO USE”.
•
If the digital video recorder is connected to a Sanyo multiplexer that allows decoding of channel information (camera numbers), channels can
be specified so that only images from those channels are searched for. If any other type of multiplexer is connected, this setting is not
possible.
Press the SEARCH FRAME/FIELD button during
recording or when the digital video recorder is stopped.
The SEARCH screen appears.
Use the jog dial to select MOTION DETECTION SEARCH
and then turn the shuttle dial clockwise.
The MOTION DETECTION SEARCH screen appears.
Use the jog dial to select SEARCH FROM and then turn
the shuttle dial clockwise.
The ALARM display flashes.
Use the jog dial to select the recording area (example:
NORMAL), and then turn the shuttle dial clockwise.
The cursor moves to CHANNEL.
Note: If the setting for MULTIPLEXER in the VIDEO INPUT SET menu is set
to “NO USE”, the cursor will move to START PREVIEW.
Examples of recording area selection:
•
ALARM: Only images in the alarm recording area are searched.
•
NORMAL: Only images in the normal recording area are searched.
•
ALARM & NORMAL: Images in both the alarm recording area and the
normal recording area are searched.
Turn the shuttle dial clockwise, use the jog dial to select
the camera number (example: 4), and then turn the
shuttle dial clockwise.
The cursor moves to START PREVIEW.
SEARCH
FRAME/FIELD
1
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
2
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
3
<MOTION DETECTION SEARCH>
SEARCH FROM : ALARM
START : -------- --:--
END : -------- --:--
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
4
<MOTION DETECTION SEARCH>
SEARCH FROM : NORMAL
START : 28-10-01 08:00
END : 28-10-01 20:00
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
5
<MOTION DETECTION SEARCH>
SEARCH FROM : NORMAL
START : 28-10-01 08:00
END : 28-10-01 20:00
CHANNEL : 4
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
English
29