Filter
Top Products
SEARCHING FOR RECORDED IMAGES
Use the jog dial to move the cursor to PREVIEW, and then
turn the shuttle dial clockwise. The screen showing the
motion sensor settings appear in the preview screen
each time the shuttle dial is turned.
Note: If no motion sensor settings have been made, “NOT FOUND” appears,
so make sure that the motion sensor settings have been made
correctly.
To view a motion sensor setting in a single-screen
display, use the jog dial to move the cursor to VIEW and
then turn the shuttle dial clockwise.
The display changes from the specified image to normal playback.
Note: When using a multiplexer and the camera number has been specified
as a channel when carrying out motion detector searches, only images
for the specified camera number will be played back. For playback of
all cameras the playback has first to be switched off and then switched
on again. Furthermore, the multiplexer title information and date
information may not be fully displayed at this time in some cases.
10
1
2
<MOTION DETECTION SEARCH>
SEARCH FROM : NORMAL / CHANNEL : 4
START :
28-10-01 10:00
END :
28-10-01 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
11
1
2
English
31