Filter
Top Products
BUZZER SET SETTING
The buzzer can be made to sound as a warning during an alarm
and when the hard disk becomes full.
1
Press the MENU button twice and display the MAIN MENU
2 screen.
The cursor moves to DISPLAY SET/VIDEO LOSS SET.
2
Use the jog dial to move the cursor to the BUZZER SET
setting, and then turn the shuttle dial clockwise.
The BUZZER SET sub-menu appears, and the cursor moves
to ALARM.
3
Turn the shuttle dial clockwise.
“OFF” flashes. Use the jog dial to change the setting to “ON”
or “OFF”.
ON: The buzzer will sound when an alarm is triggered.
4
If necessary, follow the same procedure to change the
buzzer setting (ON/OFF).
•
DISK FULL (ON):
Sets whether the buzzer sounds when disk overwriting is off
and the hard disk is nearly full.
•
DISK ERROR (ON):
Sets whether the buzzer sounds when there is a hard disk
error.
•
LOCK WARNING (ON):
When the security lock is engaged and a locked button is
pressed, the buzzer sounds.
Note: When an item is set to “ON”, the buzzer sounds twice
at an interval of about 0.5 seconds.
•
KEY IN (ON):
Sets the buzzer to sound each time an operating button is
pressed.
•
NON REC (ON):
Sets the buzzer to sound when recording stops by itself and
when another person deliberately stops recording.
5
Press the EXIT/OSD button.
The display returns to the normal screen.
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
Main menu 2 Sub-menus
Sets the buzzer to sound during alarms.
Sets the buzzer to sound when there is
no recording space left.
Sets the buzzer to sound when there is a
problem with the hard disk.
Sets the buzzer to sound when the
security lock is engaged.
Sets the buzzer to sound when an
operating button is pressed.
Sets the buzzer to sound when not
recording.
<MAIN MENU 2>
1.DISPLAY SET/VIDEO LOSS SET ->
2.RS-232C/RS-485 SET ->
3.BUZZER SET ->
4.SECURITY LOCK SET ->
5.NETWORK SET ->
6.HDD SET ->
7.POWER FAILURE/USED TIME ->
TO MAIN MENU 1 ->
MOVE LINES WITH JOG. SELECT WITH SHUTTLE
MENU
<BUZZER SET>
ALARM : OFF
DISK FULL : ON
DISK ERROR : ON
LOCK WARNING : ON
KEY IN : OFF
NON REC : OFF
EXIT/OSD
60
English