MAIN FEATURES
This digital video recorder can be used to store images recorded by
a monitoring camera onto its built-in hard disk.
•
Equipped with a large-capacity 3.5-inch hard disk drive.
•
Recording and playback of images can be carried out using
digital signals from a multiplexer.
•
Playback can be carried out at the same time as recording.
•
Alarm recording tracks movements of suspicious individuals.
•
Timer recording lets you record different sessions each day.
•
Pre-alarm recording records the images immediately before an
alarm.
•
Audio recording and playback is also possible.
•
Has a built-in motion detector function that can trigger alarm
recording when movement is detected.
•
Recorded images can be copied using CompactFlash cards.
•
Includes a variety of search functions.
☞ Alarm searching using an alarm event list or thumbnail alarm
images
☞ Time and date searches based on recording date and time
☞ Motion sensor detecting by searching for the movement of a
suspicious individual
•
A zoom function allows images being monitored or played back to
be enlarged for display.
•
Images can be captured by field or by frame.
•
The image quality mode can be selected from five modes for both
field and frame.
•
Three levels of security lock are available.
•
A PCMCIA-compatible network card can be used to carry out
network control.
•
Includes an RS-232C interface for computer control.
•
Connection to a system controller (sold separately) is possible
using an RS-485 interface.
•
A PCMCIA-compatible SCSI card can be used for backups to
DDS (DAT) drives.
Setting-up environment
Leave a space of at least 5 cm between the digital video recorder
and other nearby objects.
Ventilation holes are located at both sides and on the base of the
digital video recorder. Do not allow these ventilation holes to be
covered when setting up the recorder.
Furthermore, avoid using the digital video recorder in places with
poor ventilation.
ACCESSORIES
Power cord Ferrite core
Fixer power cord tie
Hard disk protection
If any hard disk format errors are found when the power is
turned on, the whole hard disk is checked automatically. If any
further problems are found with the hard disk, the POWER
indicator flashes. Please contact the place of purchase if you
need to reformat the hard disk or make backups of any
images. The hard disk is very sensitive to dust, vibration and
shocks, and it should not be used in places near sources of
magnetic fields. Be sure to observe the following points in
order to prevent any loss of data.
•
Do not subject the digital video recorder to shocks.
•
Do not use the digital video recorder in places where it will
be subjected to vibration or places which are unstable.
•
Do not disconnect the power cord while recording or
playback is in progress.
•
Do not use in places which are subject to rapid changes in
temperature (changes of around 10°C in an hour).
•
If the digital video recorder is moved to a place with a
large difference in temperature or a high level of humidity,
condensation may form. If the digital video recorder is
used with condensation inside it, operating problems may
occur.
•
Do not install the digital video recorder in places which are
constantly vibrating, such as vehicles or trains.
The hard disk and cooling fan are
consumables.
•
These parts should generally be replaced after 2 years of
use (for the hard disk) or 3 years of use (for the cooling
fan) at normal temperatures of 25°C. These periods of
time are intended as guides only, and are not a guarantee
of product performance.
For important recordings
•
Always check whether a recording has been recorded
properly.
•
In case a recording was not recorded properly with this
unit because of faulty connections with other equipment or
a correct playback is not possible, any claims for
compensation will be declined.
•
For important recordings, it is recommended to make a
periodical backup copy for protection against loss from any
malfunction or accident.
4
English