Filter
Top Products
16
Setting up for your PC
By installing the “AX Remote Editor” on
the supplied CD-ROM onto your PC, you
can set up the Remote Commander
simply with your PC.
“AX Remote Editor” makes setting up
complex series of operations (a macro)
easy, and also allows various other
convenient functions to be set up. For
details, see the Help menu provided in
“AX Remote Editor.”
“AX Remote Editor” system
requirements
Operating systems (manufacturer
installed):
Windows XP Media Center Edition
2005/Windows XP Media Center
Edition 2004/Windows XP Media
Center Edition/Windows XP
Professional/Windows XP Home
Edition/Windows 2000 Professional
Computer:
IBM PC/AT or compatible (The
software does not run on Macintosh
operating system)
CPU:
Pentium II, 300 MHz or more
Required Hard Drive Capacity:
20 MB or more
RAM:
64 MB or more (128 MB or more for
Windows XP)
Display:
High (16 bits) color or higher,
1024 × 768 dots or better*
Required Peripherals:
CD-ROM Drive, USB port
* Does not operate with a display of under
1024 × 768 dots.
Installing the “AX Remote
Editor”
Follow the instructions below to install.
Notes
• Do not simply copy the “AX Remote Editor”
folder in the supplied CD-ROM to a PC. You
need to install it properly for it to work.
• Administrator privileges are required for
installation on PCs running Windows 2000 or
Windows XP.
1 Close all software running on
Windows.
2 Insert the supplied CD-ROM into
the CD-ROM drive of the PC.
After a moment, “RM-AX4000 Install
CD Menu” appears.
3 Click [Install AX Remote Editor].
“AX Remote Editor 1.1 Setup”
appears.