Filter
Top Products
42
Adjusting the clock
You can adjust the clock after setting.
To change this setting, perform the
following procedure.
1
While pressing the
COMMANDER OFF button,
press the MUTING button.
MUTING
OFF
COMMANDER
“SET” appears as the Display title.
SET
SU
LEARN
NG
LIGHT DISPLAY OTHER
If “OTHER” does not flash on the
Label keys, press the Display title
(SET) repeatedly until it appears.
2
Press “OTHER” on the Label
keys.
OTHER
“OTHER” appears as the Display title.
OTHER
SU
LEARN
NG
BEEP DS_TIME CLOCK RESET
3
Press “CLOCK” on the Label
keys.
CLOCK
The setting display for clock appears.
CLOCK
SU
AM
LEARN
NG
SET STD_TIME
4
Press the F/f/g/G buttons to
change the time or day.
Each time the G or g button is
pressed, the Clock display changes in
order (the day y the hour y
the minute y the day).
Each time the F or f button is
pressed, the hour or minute changes
by 1 hour or minute.
Select the hour or minute by pressing
the (G/g) button first.
5
Press “SET” on the Label keys.
SET
With a beep sound, the clock is
started. “OTHER” appears as the
Display title.
OTHER
SU
LEARN
NG
BEEP DS_TIME CLOCK RESET