Filter
Top Products
40
3
Press and hold the
COMMANDER OFF button for
more than 2 seconds.
OFF
COMMANDER
The Remote Commander turns off.
If you want to quit before
finishing
Press and hold the COMMANDER OFF button
for more than 2 seconds. The previous status
returns, and the Remote Commander turns off.
Setting the LCD display
(continued)
Setting the contrast of the
LCD display
You can adjust the contrast of the LCD
display if the screen is not viewed
properly. To change this setting, perform
the following procedure.
1
While pressing the
COMMANDER OFF button,
press the OK button.
OK
OFF
COMMANDER
The setting display for contrast
appears.
CONTRAST
SU
213
546
ENTER+10
8
0
79
POWER
REC
INPUT
DISPLAY
MAIN/SUB
LIST
A/B
TOP MENU
LEARN
NG
2
Press the CHANNEL +/– button
to adjust the contrast of the LCD
display.
CHANNEL
You can set the contrast level from 1
to 15.
CHANNEL +: Darker contrast
CHANNEL –: Lighter contrast
Note
If you press the CHANNEL +/– button and
the contrast level is already at the
minimum/maximum level, the beep does
not sound. The level can be set from 1 to 15.