Filter
Top Products
33
Operating
Locking the controls
– Hold function
To prevent accidental operation, you can
lock all the buttons with the Hold
function. However, any programmed
Timer functions will still be activated
while the controls are locked.
While pressing the COMMANDER
OFF button, press the touch-key.
A message reminding you to release the
Hold function appears for 10 seconds on
the LCD display.
When the controls are locked
If you attempt to operate the Remote
Commander, a message reminding you
to release the Hold function appears for
10 seconds on the LCD display.
SU
LEARN
NG
Press COMMANDER OFF and TAP LCD.
To unlock the controls
While pressing the COMMANDER OFF
button, press the touch-key.
With a beep sounds, the previous status
display returns.
To turn off all the
components at one time
EPG
MENU
SYSTEM CONTROL
OK
1 MORE43
COMPONENT
VOLUME
BACK
X
PRESS
2
RECALL
LIGHTTIMER
MUTING
SYNC-UP
CHANNEL
EXIT TOOLS
ALL OFF
LEARN
NG
OFF
COMMANDER
If you press the ALL OFF button, all
controlling components turn off.
Some components may not turn off by
pressing the button. In this case, press the
SYNC-UP button to synchronize with the
power on/off status of the components.
For details, see “To synchronize with the
status of a component” on page 28.
ALL OFF button