Filter
Top Products
45
Setting by On-Remote Setup
The following section explains On-
Remote Setup. If you set the Remote
Commander by On-PC Setup, these
explanations are not valid.
Setting the preset
codes
You should register components to the
Remote Commander by setting their
preset codes.
Setting of the preset code is required in
the following cases:
–To use a Sony component that is not
registered to the Remote Commander
by the default setting
–To use other brands of components
Example: To set up a Philips TV
1 See the tables in the supplied
“Preset Code Lists,” and find the
four-digit preset code for the
desired component.
If more than one preset code is listed
for the component, use the first
number on the list.
For example, to set up a Philips TV,
you would use the preset code “8011.”
Tip
The first digit of the preset code means the
type of component (TV, VCR, etc.). For
further details, see the tables in the
supplied “Preset Code Lists.”
2 While pressing the
COMMANDER OFF button,
press the MUTING button.
MUTING
OFF
COMMANDER
“SET” appears as the Display title.
SET /1
SU
LEARN
NG
PRESET LEARN MACRO TIMER
3 Press “PRESET” on the Label
keys.
PRESET
“PRESET” appears as the Display
title. The component name flashes on
the Label keys.
If a page number such as “/1”
appears to the right side of Display
title, multiple pages are available.
Press the number to go to the next
page.
PRESET /1
SU
LEARN
NG
TV A-CBL D-SAT DVD
Continued
Setting by On-Remote Setup