Filter
Top Products
9
Getting Started
5 XPRESS button (page 22)
The XPRESS names appear as the
Label keys. When you press an
XPRESS name, the operating display
for that XPRESS function appears, and
its macro is performed.
6 MENU button
Calls up the menu screen for
components that have menu function.
7 EPG button
8 OK and Cursor Control buttons
9 EXIT button
q; TOOLS button
qa SYSTEM CONTROL buttons
(pages 31, 51)
You can automatically carry out the
entire program by pressing one
button.
qs Display title
Shows the title of the LCD Display. If
a page number such as “/1” appears,
multiple pages are available. If you
press the number, next page displays.
qd Touch-keys
The keys are used for setting the
Remote Commander and operating
each component appear on the LCD
display.
Note
Do not press the touch-keys using sharp
objects such as pins or ball-point pens.
qf SYNC-UP button (page 28)
Used to synchronize the Remote
Commander with the status of a
component .
qg TIMER button (page 29)
Used to set the timer program on/off.
qh COMMANDER OFF button
Turns the power of the Remote
Commander off.
qj LIGHT button (page 32)
Used to brighten the backlight in the
dark. Press the button once to turn
on/off the backlight.
qk CHANNEL +/– buttons
Selects the channel.
ql VOLUME +/– buttons* (page 27)
Adjusts the volume.
w; RECALL button
wa ALL OFF button (page 33)
ws MUTING button* (page 27)
Silences the sound. Press the button to
silence, and again to return to the
previous volume level.
wd MORE button (pages 31, 51)
The System Control keys (SYSTEM5-
8) are displayed as the Label keys.
When you press a System Control key,
its macro is performed.
Note
No default System Control key macros are
set at the factory.
* Note on the VOLUME +/– and
MUTING buttons
When you select a visual component, the
TV’s volume will be controlled; when you
select an audio component, the amplifier’s
volume will be controlled.
Note on the LCD display’s power
on/off
To turn on the LCD display, press any button
except the COMMANDER OFF button.
To turn off the LCD display, press the
COMMANDER OFF button. If you do not use
the Remote Commander within 5 minutes, the
LCD display automatically turns off.
This interval can also be changed (page 37).