Filter
Top Products
Viewing the systemstatus
To view the system status:
1
2
3
From the Setup menu, highlight Installation and press
@. A new set of Installation menu icons will appear.
Open the System Status menu, highlight System
Information, and press @.
Press • • to scroll through the menu bar to select the
Software Version and view the related information.
To close the screen and return to the Installation
menu:
Highlight Done and press @.
To return to normal viewing:
Press _i_.
Reset Factory Defaults
To reset all settings and channels to their factory
default values:
1 From the Setup menu, highlight Installation and press
@. A new set of Installation menu icons will appear.
2 Open the System Status menu, highlight System
Information, and press @.
3 Press • • to scroll through the menu bar to select
Factory Defaults.
4 Enter your PIN code (or 0000 if no PIN code has been set).
5 Highlight Yes and press @. The TV will turn off
automatically after a few seconds. After the TV turns off,
unplug the TV power cord and then plug it in again to
complete the reset process.
To cancel the reset:
Highlight No and press @.
Selectingthe Power-OnMode
You can select either Power-Saving or Fast mode.
• Power-Saving mode keeps power consumption in standby
mode to below 3W. As a result, it takes a bit longer for the
TV to turn on.
• Fast mode increases power consumption in standby mode.
As a result, the TV will turn on more quickly. While in Fast
mode, the yellow LED on the front of the TV will be lit.
To set the Power-On Mode feature:
1 From the Setup menu, highlight Power-On Mode and
press •.
2 Press • or • to select either Power-Saving or Fast, and
press @.
To return to normal viewing:
Press _iil.
Selectingthe DemoMode
You can set the TV's demo mode to On or Off.
This feature is provided for demonstrational purposes only.
To select the Demo Mode:
1 Press _, and open tile Setup menu.
2 Highlight Demo Mode and press •.
3 Press • or • to select either On or Off, and press @.
Note:/f #_e dome mode has been set to On, the Dome mode
will run automatically when you turn on the TV.
4O