Filter
Top Products
Setting the PCAudio
This function allows you to output or mute the sound from
your PC when connecting using the PC IN terminal and an
analog RGB cable.
To set the PC Audio:
1
2
From the Audio menu, highlight Audio Setup and press
@.
Press • or • to select PC Audio and then press • or•
to select No or Yes.
Yes: When viewing the PC input, the audio from the PC
Audio input can be heard.
No: When viewing the PC input, there will be no audio.
Note: Because the PC and HDMI 1inputs share the same
analog audio input, the PC Audio menu setting influences
the HDMI 1 Audio menu setting. If PC Audio is set to
"No," the HDMI 1 Audio setting changes to "Auto." If PC
Audio is set to "Yes," the HDMI 1 Audio setting is set to
"Digital" and is grayed out in the menu. (Also see item 4
on page 11 and "Setting the HDMI TM audio mode" on
page 39.)
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length
of time (maximum of 180 minutes).
To set the sleep timer using the remote control:
Press s_Epon the remote control to set the length of time until
the TV turns off. Repeatedly press s_Epto increase the time in
10-minute increments, or press • or • to increase or decrease
the time in 10-minute increments, to a maximum of 180
minutes.
To set the sleep timer using the on-screen menus:
1 From the Setup menu, highlight Sleep Timer and press
@.
2 Press the Number buttons to enter the length of time in
10-minute increments.
3 Highlight Done and press @.
Note: When a power failure occurs, the sleep timer setting
may be cleared.
To display the remaining sleep time:
Press SLQ_EP,
Note: A message will display on-screen when there is one
minute remaining on the sleep timer.
To cancel the sleep timer:
Repeatedly press s_Epuntil it is set to 0 minute.
UsingREGZA-LINK
This is a new feature that uses CEC technology and allows you
to control Toshiba REGZA-LINK compatible devices from the
TV remote via HDMI connection (_g:"page 17).
When the Enable REGZA-LINK in the REGZA-LINK
Setup menu (_g:"page 58) is set to On, the following
REGZA-LINK functions will be enabled.
REGZA-LINKplayback device (HD DVD
player, etc.) control
With your TV's remote control, or using tile REGZA-LINK
Player Control menu, you can control the connected
REGZA-LINK playback device you are watching.
Available remote control key functions:
Before using the following key functions, first set the MODE
SELECT switch on the remote control to TV.
PLAY
cE) Begins playback.
STOP
c_3 Stops playback.
PAUS_STEP Pauses the picture during play or record
mode.
SKIP
Skips forward.
SKIP
Skips backward.
FF
Fast-forwards.
NEW
Rewinds/reverses.
• • • • Navigate contents menu, etc.
@ Enters contents menu, etc.
[g_ Returns to the previous menu.
Note: These functions depend on the devices connected.
(continued)
57