Filter
Top Products
REGZA-LINK Player Control menu functions:
1 Press _ and open the THINC Applications menu.
2 Highlight REGZA-LINK Player Control and press @.
3 Press • or • to select the item you want to control and
press @.
Power Turns the select device on and off.
Top Menu Accesses the top menu of a DVD.
Menu Accesses the menu of a DVD.
Accesses the contents list when you press
Contents @. At this time, the REGZA-LINK Player
Menu Control menu will disappear.
Note:
• These functions depend on the devices that are connected.
• The REGZA-LINK Player Control item will be grayed out in
the following conditions:
- A non-HDMI input is currently selected.
The Enable REGZA-LINK item is set to Off
The connected CEC device is not a playback or recording
device.
REGZA-LINKinput source selection
If a REGZA-LINK device with HDMI switching capability
(e.g. Audio Receiver) is connected to the HDMI input, you can
select another REGZA-LINK device that is connected to the
master HDMI device using the TV's INPUT button. See page
41 for details.
VOLUMEand MUTE controls of Audio
Receiver
With your TV's remote control, you can adjust or mute the
sound volume of the Audio Receiver. First, set the MODE
SELECT switch on the remote control to TV.
• [_o__ adjust tile volume level.
• (_ turns off the sound.
Note:
• To use this function:
Set Speaker Preference to Audio Receiver in the
REGZA-LINK Setup menu.
Confirm that a connected REGZA-LINK device (such as
HD DVD player, etc) is selected for the Audio Receiver
input source.
• You can also use this function when the audio receiver is
connected to the TV's DIGITAL AUDIO OUT terminal (not
HDMI connection). In this case, select a digital audio input
mode on the Audio Receiver.
• These functions depend on the device connected.
Other REGZA-LINKfunctions
When the Enable REGZA-LINK and each item in the
REGZA-LINK Setup menu are set to On, the following
functions will be enabled.
If a connected HDMI device starts playing
TV Auto
video or audio, the TV will automatically
Input Switch
switch to the appropriate HDMI input.
If a REGZA-LINK device is turned on the
TV Auto Power
TV turns on automatically.
If the TV is turned off. the TV will send a
Device Auto
message to turn off all of the REGZA-
Standby LINK devices connected to the TV.
Speaker
Preference
From this item, you can set your audio
output preference to the TV speakers or the
audio receiver speakers. When this item is
set to Audio Receiver, the TV remote can
be used to adjust or mute the volume of the
audio. This item will be grayed out unless a
REGZA-LINK compatible audio receiver
is connected.
Note: When you turn on the Audio Receiver, change its input
source, or adjust the sound volume, the sound will be output
from the audio receiver's speakers even if TV Speakers has
been selected. Turn the TV off and on again to output the
sound from the TV speakers.
58