Filter
Top Products
Usingx.v.Color Selection feature
The color range "x.v.Color" is an international standard and
enables a wider color range than conventional video
applications.
When set to Auto, picture settings are automatically set when
an x.v.Color signal is detected.
When set to On, x.v.Color detection does not occur, so picture
settings are always adjusted for x.v.Color.
When set to Off, normal processing occurs.
Note: If a non-HDMI input is selected or the x.v.Color setting
in the HDMI Settings menu is set to Off, this feature will appear
grayed out in the Video menu.
To change the x.v.Color Selection:
1
2
Press _ and open the Video menu.
Press • or • to highlight x.v.Color Selection and press
• . Press • or • to select the settings you prefer (Auto,
On or Off) and press _._.
"x.v.Color" and the "x.v.Color" logo are trademarks of Sony
Corporation.
Usingthe Game Mode feature
You can use the Game Mode feature for shorter frame delays
when playing a video game requiring split-second timing
between the on-screen display and input from the controller
(such as music creation and high-action games).
This feature is more effective for 480i and 1080i input signals.
Note: To use the Game Mode feature, the current video input
must be Video 1, Video 2, ColorStream HD1,
ColorStream HD2, HDMI 1, HDMI 2, HDMI 3, HDMI 4, or PC.
The Game Mode cannot be turned on when the ANT/CABLE
input is selected.
To turn on Game Mode:
1 From the Video menu, press • or • to highlight the
Game Mode field and press •. Press • or • to select O n
and press _._.
To turn off Game Mode:
Select Off in step 1 above, change the video input, or turn the
TV off andthen on again.
Note: You can change the video input by pressing @E)on the
remote control (_r_,page 41).
Usingthe advancedaudio settings
features
Usingthe surroundsound features
Stereo Extension, Voice Enhancement, and Dynamic Bass
Boost help to create a thrilling surround sound experience with
deep, rich bass from stereo sound sources. Your TV's audio
will sound fuller, richer, and wider.
To adjust the settings:
1
2
3
4
Put the TV in STEREO mode (_ "Selecting stereo/SAP
broadcasts" on page 51).
From the Audio menu, highlight Advanced Audio
Settings and press@.
Press • or • to highlight the feature you want to adjust,
and then press • or • to adjust the item.
To turn the surround sound effect On or
Stereo Off.
Extension Note:If the broadcast is monaural, the
Stereo Extension effect will not work.
Voice To turn the vocal emphasis effect On or
Enhancement Off.
Dynamic Bass To select the desired bass expansion
Boost level (Off, Low, or High).
To save the new settings, highlight Done and press @.
To revert to the factory defaults, highlight Reset and
press @.
64