Filter
Top Products
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
69
Display
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
2 Select “Display” using [U / D], then
press [ENTER].
3 Select the desired item using
[U / D], then press [ENTER].
4 Refer to 1. and 2. on this page and
set the selected item.
5 When you finish with the setting,
press [SETUP] to exit.
1. Screen Saver (Default: 10 minutes)
Set the screen saver time delay.
Select a setting using [U / D], then
press [ENTER].
Your setting is activated.
2. FL Dimmer (Default: Bright)
Set the front panel display brightness.
Select a setting using [U / D], then
press [ENTER].
You can choose one from “Auto”, “Bright” or
“Dark”.
If “Auto” is selected, the display gets dark when
the power is off.
Video
1 In stop mode, press [SETUP]. Select
“General Setting” using [U / D],
then press [ENTER].
2 Select “Video” using [U / D], then
press [ENTER].
3 Select the desired item using
[U / D], then press [ENTER].
4 Refer to 1. and 3. on this page and
set the selected item.
For 2., refer to page 38.
5 When you finish with the setting,
press [SETUP] to exit.
1. TV Aspect (Default: 4:3 Letter Box)
You can select the TV aspect ratio to match the
formats of what you are playing back with the unit and
your TV screen (4:3 standard or 16:9 widescreen TV).
Select the desired setting using
[U / D], then press [ENTER].
If you have a standard TV:
Select “4:3 Letter Box”, so that black bars appear on
the top and bottom of the TV screen when playing
back a wide-screen picture. Select “4:3 Pan & Scan”
for a full height picture with both sides trimmed when
playing back wide-screen picture.
If you have a widescreen TV:
Select “16:9 Wide”.
3. Video Out (Default: SCART(RGB))
This unit is compatible with the Progressive Scan
System. The feature provides you with the higher
definition images than the traditional output system
does. To utilise this feature, you must set Video
Output mode in the Setup menu by following the steps
on the right. “SCART (RGB)” is selected as the
default.
General Setting
Display
Video
Clock
Channel
DivX
Reset All
Recording
Playback
Screen Saver
FL Dimmer
1
2
Screen Saver
OFF
5 minutes
10 minutes
15 minutes
30 minutes
FL Dimmer
Auto
Bright
Dark
General Setting
Display
Video
Clock
Channel
DivX
Reset All
Recording
Playback
TV Aspect
Select Video
Video Out
1
2
3
TV Aspect
4:3 Letter Box
4:3 Pan & Scan
16:9 Wide
E9GA0BD_EN.book Page 69 Monday, March 26, 2007 10:14 AM