Filter
Top Products
7
DVI or SDI board from the anti-static bag. (The DVI
board is shown in the pictures below.)
6. Carefully slide the right side of the board into the slot
on the right side of the opening.
7. Align the connector on the board with the connector in
the opening.
Gently push the board into the connector. The board is
fully seated when the four screw holes (six for the SDI
board) are aligned.
8. Screw down the four corners of the DVI board (six
screws for the SDI board) with the supplied mounting
screws.
Use a grounding wrist
strap (not shown) or
other personal ESD
devices to prevent
damage to the board