Filter
Top Products
23
3.2.1 Selecting the Picture
Selecting the source (picture) manually is usually quicker than using the SETUP button.
Selecting the picture is really selecting the input connector.
If you have the Base Model, you have only one connector,
which is a HD-15 for analog computer sources. If you have
either the Video Model or the Broadcast Model, you have
the following additional connectors:
Computer sources
Use the HD-15 connector for standard analog inputs, the
type we’ve used for years with computers. For digital
inputs, use the DVI connector. Either of these accepts pic-
tures of the following common standards as well as many,
many others:
Component video sources
Component video sources are assumed to be YPbPr.
DVD and component video sources
DVD players have composite video and S-Video out-
puts, and sometimes have component video outputs from
three RCA connectors. Component video sources are
assumed to be YPbPr, so you do not need to specify the
colorspace.
✎ HDCP (High Definition Copy Protection) is not
supported.
Composite Video and S-Video
These two inputs accept NTSC and PAL. The Compos-
ite connector also accepts SECAM video.
To manually select the source
1. After the display is on, press
MENU on the remote.
This opens the Main Menu.
w
2. With Picture highlighted, press ENTER
This opens the Picture menu.
Video Model
(DVI Board)
Broadcast Model
(SDI Board)
Digital SDI
Component (YPbPr) Component (YPbPr)
Composite Composite
S-Video S-Video
Type Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
SXGA 1280 x 1024
1360 x 768
1366 x 768
UXGA 1600 x 1200
HD1920 1920 x 1080
VESA 640 x 400
Main Menu
Picture
Size & Position
Aspect Ratio & Wall
Memory
Diagnostics
Advanced Options
“
Program Information
Picture
Source Digital
Colorspace RGB
Vertical Frequency (frame locked) 60Hz
Horizontal Frequency 50.00kHz
Horizontal Resolution 1366
Vertical Resolution 768
Sharpness Normal
Input Levels