Filter
Top Products
93
Color Balance Settings
Menu Item Description Setting(s)
Color Temperature Adjust the “pure white” of the system to different color
shades
3200°K (Warm), 5500°K, 6500ºK,
8500°K (Cool)
White Balance - All Adjusts the white balance setting of all three colors
simultaneously, keeping them in proportion to each
other, thus keeping the color the same, and adjusting the
brightness of white to match other units in an array.
Clipboard
Red Adjusts each of the colors separately, allowing the user
to change the color of white to match other units in an
array.
0-100
Green
Blue
Gray Balance - All Adjusts the gamma setting of all three colors simulta-
neously, allowing the user to change the brightness of
gray to match other units in an array
Red Adjusts the gamma of each of the colors separately,
allowing the user to change the color of gray to match
other units in an array
0-15
Green
Blue
Test Pattern The four test patterns are the same patterns available
from Main > Diagnostics > Test Patterns but are more
conveniently accessed from this menu when you are
using the remote to color balance units.
Off, White, Gray, Grayscale, Colors
Hide Menu Use Hide Menu to quickly hide the on-screen menu while you are doing color balancing using a
remote
Copy to Clipboard To compare settings, you can save to the clipboard or recall from the clipboard a range of settings.
This can dramatically speed up the process of performing color balancing. For more information
on color balancing an array of units, see “Adjusting Color Balance” on page 46.
Recall From Clip-
board
Reset to Defaults Reset all the settings to the factory defaults.