Filter
Top Products
FR-2
Field Memory Recorder (Chapter 3: Names and functions)
36
23) [LINE/MIC] switches
These switches select analog input sources of the left and right channels between MIC and
LINE. You can select the sources of the left and right channels independently.
24) [TRIM] controls
These controls adjust the analog input levels of the left and right channels.
[F FWD] key
While stopped, pressing this key fast-forwards the transport.
During playback, pressing this key cues the transport in the forward direction at up to
double speed.
By pressing this key while holding down the [STOP] key locates the record end point (REC
END) of the current file.
[REWIND] key
While stopped, pressing this key rewinds the transport.
During playback, pressing this key cues the transport in the reverse direction at up to
double speed.
By pressing this key while holding down the [STOP] key locates the beginning (ABS 0) of the
current file.
25) [HPF] switches
These switches select ON or OFF of the high-pass filter (100 Hz,12 dB/oct).
26) Transport keys
[PLAY] key
Starts playback of the current file.
[STOP] key
Stops the transport.
When the unit is in the MENU mode, pressing this key exits the MENU mode.
Pressing the [F FWD] or [REWIND] key while holding down the [STOP] key moves the
transport as follows.
<Note>:
With a file recorded at 176.4 or 192 kHz FS, you cannot operate cueing play-
back.
When the [LINE/MIC] switch is set to LINE Adjustable within the range between -30 dBu and +4 dBu.
When the [LINE/MIC] switch is set to MIC Adjustable within the range between -60 dBu and -26 dBu.
[STOP] + [REWIND] The transport locates to the beginning (ABS 0) of the current file.
[STOP] + [F FWD] The transport locates to the record end position (REC END) of the current file.