Filter
Top Products
92
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the battery type (Battery)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select "Battery" on the second page and press the [ENTER]
key.
The current setting (by default, "NiHM") starts flashing.
3) Use the [MENU] dial to select the desired battery type and press the [ENTER] key.
You can select the type from among "NiHM" (default), "NiCd" and "Alkali(ne)".
By pressing the [ENTER] key after selecting the desired option, the setting is fixed and the
display returns to show the previous screen.
4) Press the [HOME] key to exit the MENU mode.
<Caution>:
Before operating the unit on batteries, make sure that the battery type is cor-
rectly set by this item. If the batteries do not match the setting, the error tone may not be
correctly generated due to the difference of the power voltage, etc.
This menu item selects the battery type when you use batteries (alkaline, Ni-Cd, or
Ni-HM) for operating the unit.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key