Filter
Top Products
FR-2
Field Memory Recorder (Chapter 3: Names and functions)
40
• When a virgin memory card is set
When a virgin memory card (CFC or ATA) is set in the slot, turning on the unit
brings up the Home screen as shown below after the unit starts up.
You can see "<No Files>", as well as the time or space remaining on the current
card for recording. (You can select whether to show the remaining time or space
using the setting of the "RemainDisplay" menu item on the "Setup" menu in the
MENU item. By default, the remaining time is shown.)
• When a recorded memory card is set
When a recorded memory card (CFC or ATA) is set in the slot, turning on the unit
brings up the Home screen as shown below after the unit starts up.
The recorder is stopped at the beginning of the current audio file ("File 001").
MENU mode screens
By pressing the [ENTER] key while stopped, the FR-2 enters the MENU mode and
the display changes to show the MENU mode screen.
In the MENU mode, the Cue menu, File menu, Disk menu, Setup menu and USB
Mode menu are available. Each menu has various menu items, from which you can
make desired settings according to your system or purpose.
" " at the right of a menu title shows that the menu has more than one pages.
See from page 61 for details about the MENU mode.
You can turn on or off the backlight of the LCD display, as well as adjust the
contrast, allowing you to see the display comfortably on any circumstance.
See "Chapter 2: Before using the FR-2" on page 22 for details.