Filter
Top Products
58
FR-2
Field Memory Recorder (Chapter 5: Recording/playback)
Playback in the CUE mode (Cueing playback)
During playback, pressing the [F FWD] (or [REW]) key enters the cue mode. In this
mode, you can hear the playback sound at up to twice the normal speed in the
forward direction or at the normal speed in the reverse direction.
Playback
Normal audio playback
1) Make sure that a recorded card is set to the slot.
2) Select a desired audio file.
You can select an audio file by either of the following two ways.
<Selecting using the CUE ( / ) keys>
While the recorder is stopped, pressing the [ ] or [ ] key while holding down
the [SHIFT] key selects the previous or next audio file (the recorder skips to the
beginning of the selected file).
3) Press the [PLAY] key to start playback.
The [PLAY] indicator is lit.
4) The playback sound can be monitored via headphones or the internal speaker.
5) To stop playback, press the [STOP] key.
<Selecting an audio file using the "Select" menu item on the File menu>
Pressing the [ENTER] key while the recorder is stopped enters the MENU mode,
and the display shows the screen for selecting a menu.
Use the [MENU] dial to select "File" and press the [ENTER] key.
The display now shows the file list.
Use the [MENU] dial to select the desired file and press the [ENTER] key. In the
screen example below, file names are given with the "Default file name" set to
"Date".
The display now shows the Home screen, on which you can see the recorder
stops at the beginning of the selected file.
<Note>:
Cueing playback is not possible with a file recorded at 176.4 or 192 kHz FS .