Fostex FR-2 DVR User Manual


 
66
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Cue menu)
Editing time data of a cue point (Edit)
1) Use the [MENU] dial to select "Cue" and press the [ENTER] key.
The display now shows the cue point list in which all cue points stored in the current file
are shown.
2) Use the [MENU] dial to select a desired cue point and press the [ENTER] key.
The display now shows the Cue menu. In the screen example above, "C01:Mark01" is
selected.
3) Use the [MENU] dial to select "Edit" and press the [ENTER] key.
The display now shows the screen as below, on which you can edit time data of the cue
point (initially, the minute field flashes).
4) Use the [MENU] dial to enter the desired value in the hour field and press the
[ENTER] key.
The value is fixed and the cursor moves to the left part of the decimal point in the minute
field.
5) Use the [MENU] dial to enter the desired value in the minute field and press the
[ENTER] key.
The value is fixed and the cursor moves to the left part of the decimal point in the second
field.
6) Use the [MENU] dial to enter the desired value at the left part of the decimal point in
the second field and press the [ENTER] key.
The value is fixed and the cursor moves to the right part of the decimal point in the
second field.
7) Use the [MENU] dial to enter the desired value at the right part of the decimal point in
the second field and press the [ENTER] key.
The FR-2 starts the operation for storing the edited time data. When completed,
"Completed!" is shown on the screen and the display returns to show the Home screen.
<Note>:
Depending on time data to be stored, the cue number may be changed.
In the example above, the entered time data is stored to Cue 03.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.