Fostex FR-2 DVR User Manual


 
69
FR-2
Field Memory Recorder (Chapter 6: MENU mode/File menu)
Renaming an audio file (Rename)
1) Use the [MENU] dial to select "File" and press the [ENTER] key.
The display now shows the audio file list in which all recorded audio files on the current
card are shown.
2) Use the [MENU] dial to select a desired audio file and press the [ENTER] key.
The display now shows the File menu. In the screen example above, file "004" is selected.
3) Use the [MENU] dial to select "Rename" and press the [ENTER] key.
The display now shows the screen as below, on which you can edit the file name.
The cursor in [ ] is called "file name cursor", while the cursor in the character options is
called "character selection cursor". You can move the character selection cursor by using
the [MENU] dial.
4) Enter the desired file name.
See the table below for details about how to enter a name. Up to 32 characters can be
entered.
To edit a character
highlighted (on the
cursor position)
Use the [MENU] dial to select a desired character from among the character options,
and press the [ENTER] key. The selection is fixed and the file name cursor moves
right.
To move the file name
cursor position
Use [I<<] or [>>I] key. Or use the [MENU] dial to select "<-" or "->" in the character
options, and press the [ENTER] key.
Inserts a front space
at the file name cursor
position
After moving the file name cursor to the desired position, move the character selec-
tion cursor to "INS" at the bottom, and press the [ENTER] key. (The FR-2 is put into
the INSERT mode and the file name cursor condition changes to be lit solid.) After
that, select the character that you would like to insert by the character selection
cursor and press the [ENTER] key again. In order to cancel the INSERT mode,
select the “INS” and then the [ENTER] key. (The file name cursor condition changes
to be flashing.)
To delete a character
on the file name cur-
sor position
After moving the file name cursor to the desired position, move the character selec-
tion cursor to “DEL” at the bottom, and press the [ENTER] key.
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.