Filter
Top Products
62
FR-2
Field Memory Recorder (Chapter 6: MENU mode/MENU mode overview)
Menu mode outline
By pressing the [ENTER] key while the recorder is stopped, the FR-2 enters the MENU
mode and the display changes to show the screen as below.
This screen is the first layer in the MENU mode and used for selecting the desired menu.
As you can see on the screen above, the available menus are "Cue menu", "File menu",
"Disk menu", "Setup menu" and "USB Mode menu".
On each menu, the following menu items are available.
By selecting "
Back
" and pressing the [ENTER] key, you can return to the previous screen.
Cue menu
File menu
Disk menu
Setup menu
USB mode menu
* Locate (Locating to a cue point)
* Rename (Renaming a cue point)
* Edit (Editing a cue point)
* Delete (Deleting a cue point)
* USB mode on/off for file transfer between the FR-2 and a PC
This menu offers items re-
garding existing cue
points.
This menu offers items re-
garding existing audio
files.
This menu offers items re-
garding memory cards.
This menu offers prefer-
ences/setup items of the
FR-2.
* Select (Selecting a file)
* Rename (Renaming a file)
* Delete (Deleting a file)
* Protect (Protecting a file)
* Restore (Restoring a deleted (hidden) file)
* Select (Selecting the current drive)
* Optimize (Optimizing a card)
* Format (Formatting a card)
* Volume Label (Editing a volume label of a card)
* Disk Info (Viewing information of a memory card)
* File Name Mode (Selecting default file name type)
* Default Scene Name (Setting the default scene name and
take number used for a file name)
* Adjust Real Time Clock (Adjusting the real time clock)
* Speaker Mute (Speaker mute function on/off)
* Error Tone (Setting error tone output condition.)
* Peak Hold Time (Setting the peak hold time of the level meters)
* Pre Rec Time (Setting the time length of audio stored in the
buffer)
* Remain Display (Selecting the remain display mode)
* Digi Out Type (Setting the digital output signal format)
* Battery (Selecting the battery type)
* Keyboard (Selecting the USB keyboard type)
* Version (Checking the ROM version)
* Init Setup (Initializing settings of the Setup menu)
See the following pages in this chapter for details about each menu item, except for the
USB mode menu which is described in "Chapter 7: Exporting files to a PC".
Menu
Description
Menu items