Filter
Top Products
88
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Setting the peak hold time of the level meters (Peak Hold Time)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select "Peak Hold Time" on the second page and press the
[ENTER] key.
The currently selected peak hold time starts flashing (by default, "3s" flashes).
When selecting "Disk Remain":
You can select between "1min" and "9min" in 1 minute steps, as well as "off" (by default,
"3min" is selected). The error tone is output when the remaining time of the memory card gets
shorter than the selected time.
4) Use the [MENU] dial to select the desired option and press the [ENTER] key.
The selection is fixed and the display returns to the previous screen.
5) Press the [HOME] key to exit the MENU mode.
This menu item sets the peak hold time of the level meters in one second steps (the
default setting is 10 seconds). The following description is assumed that the FR-2
is now in the MENU mode by pressing the [ENTER] key while the recorder is stopped.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key