Filter
Top Products
84
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
• Enabling the selected scene name
2) Select "Select" and press the [ENTER] key.
After showing "Completed!", the display returns to show the setting items.
3) Press the [HOME] key to exit the MENU mode.
For example, if you set the scene name of "Scene01" to "Original Name" and the take num-
ber to "001", the default scene name is "Original Name_001".
In this condition, if you make recording while the "File Name Mode" is set to "Scene01", a
file named "Original Name_001" is created.
If you make recording again in this condition, a file named "Original Name_002" is created.
Thus, each time you make recording, the take number is counted up.
• Resetting the scene name to the initial name
1) Press the [ENTER] key.
The display now shows the setting items for the selected scene name.
1) Select a desired scene name you want to reset, and press the [ENTER] key.
The display now shows the setting items for the selected scene name.
2) Select "Reset" and press the [ENTER] key.
The selected scene name is immediately reset to the initial name.
For example, if you reset the scene name above ("Original Name"), the scene name
returns to "Scene01".
3) Press the [HOME] key to exit the MENU mode.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Character keys
You can directly enter a character instead of selecting from among the character
options on the screen. Each time you press a character key, the scene name
cursor moves right.
Moves the scene name cursor right and left.
Back space key
Deletes the character at the scene name cursor position.
Acts the same as the [MENU] dial on the FR-2 panel.
Insert key
Turn ON and OFF the INSERT mode. When it is ON, the scene name cursor is lit
solid. When it is OFF, the file name cursor is flashing.
Delete key
Deletes the character at the scene name cursor position.
Enter key
Used to fix the scene name entered.
/ keys
/ keys