Filter
Top Products
82
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Setting the default file name (Default File Name)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the Setup menu.
2) Use the [MENU] dial to select "Default Scene Name" and press the [ENTER] key.
The display now shows the scene name list for selecting a desired scene name. The scene
name list has 17 pages.
You can select a desired option from among "Scene01" through "Scene99".
3) Use the [MENU] dial to select a desired scene name and press the [ENTER] key.
The display now shows the setting items for the selected scene name.
For example, if you select "01: Scene01", the screen looks like the one shown right below.
The function of each parameter is as below.
Take No. Selects the take number (001 through 999).
The following procedure shows how to select scene name 01 (Scene01), set
the desired scene name and Take number, and enable the setting.
Rename Renames the scene name to a new one.
Reset Sets the selected scene name to the default name (such as "Scene01").
Select Enables the selected scene name.
This menu item sets the default scene name and take number used for a file name.
The "Default scene name" setting is effective when the "File Name Mode" described
above is set to "Scene".
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.