Filter
Top Products
90
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Selecting the remain display mode (Remain Display)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the first page of the Setup menu.
2) Use the [MENU] dial to select "RemainDiplay" on the second page and press the
[ENTER] key.
The current setting starts flashing (by default, "Time" flashes).
22.05kHz
44.1kHz/48kHz
88.2kHz/96kHz
176.4kHz/192kHz
2.00s ~ 20.00s (in 2.00s steps)
1.00s ~ 10.00s (in 1.00s steps)
0.50s ~ 5.00s (in 0.50s steps)
0.25s ~ 2.50s (in 0.25s steps)
By pressing the [ENTER] key after selecting the time, the setting is fixed and the display
returns to show the previous screen.
4) Press the [HOME] key to exit the MENU mode.
This menu item selects whether to show the time or space (MBytes) remaining on
the card for recording. The following description is assumed that the FR-2 is now
in the MENU mode by pressing the [ENTER] key while the recorder is stopped.
3) Use the [MENU] dial to select the desired option and press the [ENTER] key.
You can select between "Time" (default) and "MByte".
The remaining space of the memory card is displayed in MBytes.
The remaining time of the memory card is displayed.
By pressing the [ENTER] key after selecting the desired option, the setting is fixed and the
display returns to show the previous screen.
4) Press the [HOME] key to exit the MENU mode.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key