Filter
Top Products
44
FR-2
Field Memory Recorder (Chapter 4: Basic connections)
Audio input/output connection
Analog audio inputs
12V
DC IN
3
2
1
COLD
GND
HOT
KEYBOARDPC ONLY
USB
ONLY
DIGITAL
OUT IN
RL/MONO
ANALOG INPOWER ANALOG OUT
L/MONO
PHANTOM
3
2
1
COLD
GND
HOT
ON
OFF
COMPACTFLASH CARD
PCMCIA
Analog audio device
Analog audio device
Digital audio device
Digital audio device
The FR-2 provides two [ANALOG IN] connectors (XLR-3-31, pin 2 hot) which ac-
cept two mono or a stereo pair of balanced analog audio source signals.
Each audio input accepts signals of a wide range of nominal input level from -60
dBu (microphone level) to +4 dBu (line level).
You can adjust the level using the [TRIM] controls in conjunction with the [LINE/
MIC] input selector.
When the [LINE/MIC] switch is set to LINE Adjustable within the range between -30 dBu and +4 dBu.
When the [LINE/MIC] switch is set to MIC Adjustable within the range between -60 dBu and -26 dBu.
The FR-2 can provide +48 V phantom power for condenser microphones. It is also
equipped with a HPF (High pass filter) and limiter circuit for each input channel.