Filter
Top Products
81
FR-2
Field Memory Recorder (Chapter 6: MENU mode/Setup menu)
Pressing the [ENTER] key fixes the selection and the display shows the previous screen.
4) Press the [HOME] key to exit the MENU mode.
Selecting default file name type (File Name Mode)
1) Use the [MENU] dial to select "Setup" and press the [ENTER] key.
The display now shows the Setup menu screen.
2) Use the [MENU] dial to select "FileNameMode" and press the [ENTER] key.
The current file name mode flashes (by default, "Date" flashes).
3) Use the [MENU] dial to select the desired file mode and press the [ENTER] key.
You can select the file name mode between "Date" and "Take".
Date
A file name contains time/date information of the realtime clock when the audio file is
created. For example, if a file is created at 12:30:25 on December 25 in 2003, the file
name is "B12h30m25s25dec2003y".
Take
A file name contains the desired scene name and take number.
For example, if you set the scene name to "Original Name" and take number to "001",
the file name is "Original Name_001".
Each time recording is made, an audio file is created with a specific "default" file
name which is automatically given.
This menu item selects the default file name type between the "time and date"
information when a file is created and "scene name + take number".
The following description is assumed that the FR-2 is now in the MENU mode by
pressing the [ENTER] key while the recorder is stopped.
* Up to 15 characters are shown on the display.
When a USB keyboard is connected to the FR-2, you can carry out the following operation.
Acts the same as the [MENU] dial on the FR-2 panel.
Returns to the previous screen layer.
Enter key Acts the same as the [ENTER] key on the FR-2 panel.
/ keys
key