Filter
Top Products
GFK-0467K C-1
Instruction Mnemonics
In Program Display/Edit mode, you can quickly enter or search for a programming instruction by
typing the ampersand (&) character followed by the instruction’s mnemonic. For some instructions,
you can also specify a reference address or nickname, a label, or a location reference address.
This appendix lists the mnemonics of the programming instructions for Logicmaster 90-
30/20/Micro programming software. The complete mnemonic is shown in column 3 of this table,
and the shortest entry you can make for each instruction is listed in column 4.
At any time during programming, you can display a help screen with these mnemonics by pressing
the ALT and I keys.
Function
Group Instruction
Mnemonic
All INT DINT BIT BYTE WORD REAL
Contacts Any Contact
Normally Open Contact
Normally Closed Contact
Continuation Contact
&CON
&NOCON
&NCCON
&CONC
&CON
&NOCON
&NCCON
&CONC
Coils Any Coil
Normally Open Coil
Negated Coil
Positive Transition Coil
Negative Transition Coil
SET Coil
RESET Coil
Retentive SET Coil
Retentive RESET Coil
Retentive Coil
Negated Retentive Coil
Continuation Coil
&COI
&NOCOI
&NCCOI
&PCOI
&NCOI
&SL
&RL
&SM
&RM
&NOM
&NCM
&COILC
&COI
&NOCOI
&NCCOI
&PCOI
&NCOI
&SL
&RL
&SM
&RM
&NOM
&NCM
&COILC
Links Horizontal Link
Vertical Link
&HO
&VE
&HO
&VE
Timers On Delay Timer
Elapsed Timer
Off Delay Timer
&ON
&TM
&OF
&ON
&TM
&OF
Counters Up Counter
Down Counter
&UP
&DN
&UP
&DN
C
Appendix