Filter
Top Products
5-25
Status Listings
OSA Warnings
6731 desc = “Illegal combination of trace Y axis units”
help = “A math expression could not be evaluated because the combination of Y
axis units in the input arguments do not make sense. For example it is valid to
divide watts by watts or to divide watts by a unitless value but it is invalid to
divide a unitless value by watts.”
6732 desc = “Illegal combination of trace X axis units”
help = “A math expression could not be evaluated because the input arguments
have differing X axis units. All input arguments must have identical X axis units.
This commonly happens when trace math is attempted between a zero span
trace (time units) and a non-zero span trace (wavelength units).”
6733 desc = “Invalid combination of Y axis units”
help = “A math expression could not be evaluated because of an invalid
combination of Y axis units. The math operation being performed only allows
one of the arguments to have units. All other arguments must be unitless. The
math operator is shown in parenthesis in the short message above. For example
multiplying a trace in watts (dBm) by another trace in watts (dBm) is not
permitted.”
6734 desc = “Too many inputs have Y axis units”
help = “A math expression could not be evaluated because of an invalid
combination of inputs. Only one input argument is allowed to have non-blank Y
axis units.”
6735 desc = “Trace has too many Y axes”
help = “A math expression could not be evaluated because of an invalid input.
One of the arguments contains multiple sets of Y data. Only one set of Y data is
allowed for this math function.”
6736 desc = “Math expression expects boolean inputs.”
help = “A math expression could not be evaluated because of an invalid input.
The math function requires all of it’s arguments to be boolean. At least one of
the arguments is not boolean.”
6737 desc = “Invalid math constant”
help = “During evaluation of a math expression an invalid constant was
encountered. The constant has undefined or default settings for it’s X and/or Y
values.”
6738 desc = “Out of memory”
help = “A trace or math operation was requested. There is insufficient memory
available to perform the operation. Try reducing trace length or cycle power.”
Table 5-6. OSA Warnings (9 of 11)
Error Number Error Description [description/explanation/examples]
book.book Page 25 Monday, January 31, 2000 10:34 AM