Filter
Top Products
88
www.insigniaproducts.com
Using Your TV NS-32E859A11/NS-42E859A11
If your home network does not use DHCP, select Let me
specify a static IP address, then press SELECT. The
following screen opens. Complete Steps 5 through 8 to
complete the setup.
5 Press SELECT. The Enter IP Address screen opens.
6 Use the number buttons on the remote control to enter
your IP address, then press SELECT.
7 If the displayed IP information is correct, press S or T to
highlight Yes, these are correct, then press SELECT.
OR
If the displayed IP information is not correct, press
S or T to
highlight No, let me enter specific address, then press
SELECT. Enter your subnet mask, gateway (router) address,
and DNS address.
When the connection is successful, the Network settings
screen opens.
If this is the first time you have set up the Internet, the
Network Speed Test screen opens. Follow the on-screen
instructions to complete the network setup.
10:00 PM
Static IP Setup
In this next part, you’ll specify a static IP address. To complete this process,
you will need to know the following:
- IP address
- Subnet mask
- Gateway (router) address
- DNS (name server) address
Continue
10:00 PM
Enter IP address
Use the number buttons on the remote control to enter your IP address.
Press SELECT when done
.
.
.
25
10:00 PM
Use these IP Addresses?
Are all of the following correct?
Subnet mask:
Gateway (router) address:
DNS (name server) address:
255.255.255.0
192.168.1.1
192.168.1.1
Yes, these are correct
No, let me enter specific addresses