Filter
Top Products
www.insigniaproducts.com
35
NS-32E859A11/NS-42E859A11 Getting Started
Understanding the basics
Turning your TV on or off
To turn your TV on and off:
1 Make sure that the power cord is already connected to a
power outlet.
2 Press (power) to turn on your TV. The power indicator LED
turns blue.
3 Press (power) again to turn off your TV. Your TV enters
Standby mode and the power indicator turns red or purple,
depending on the TV power on mode you select. For more
information, see “Setting the TV power on mode” on
page 93.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT on the remote control.
The input source list opens.
2 Press S or T to highlight a video input source, then press
SELECT. You can select:
•TV
•HDMI 1
•HDMI 2
•HDMI 3
•HDMI 4
• Component/Composite (to select a component or
composite device)
•VGA
Warning
When your TV is off, power still flows into it. To
disconnect power, unplug the power cord.
Note
If your TV does not detect a signal and you do not
press any buttons for several minutes, your TV goes
into Standby mode automatically.
Note
If the source sensor is turned on, the inputs that do
not have devices connected are grayed in the input
source list. When you press INPUT, your TV moves
between the inputs that have devices connected.
You can select a grayed input by pressing
S or T. For
more information, see “Turning the source sensor on
or off” on page 95.
Component/Composite
HDMI 1
HDMI 2
HDMI
3
HDMI 4
VGA
TV