Filter
Top Products
I0 HookupsWitha CableBox/DirectBroadcastSystem
• • •oe• • •oool ,oge• •o6•• •me•° .°tom eoo•• •ee• • i°•o ° °9• • ,e• • • to• • • •°tm • oe•• • •*•°o • w99oo • • ••• • ° .to• • ° t,• • ° • _••J • • • •el
There are two ways to connect your Cable Box/DBS to the DVD/VCR.With this connection:
• You may view any channel.
• You must select channels at the Cable Box/DBS. Channels cannot be changed at the DVD/VCR.
• You may not view a channel other than the one you are recording.
• You may not program channels at the DVD/VCR.
• You can only program a timer recording for one channel at a time. Set the TV and the DVD/VCR to the Cable
Box/DBS output channel (channel 03 or 04); set the CH3/CH4 switch to the same channel. Set your Cable
Box/DBS to the channel you want to record.When you enter the channel you want to record in a timer
recording, select channel 03 or 04 (the Cable Box/DBS output channel). (This is step 5 on page 37.) Leave the
Cable Box/DBS on for a timer recording.
Cable Box/DBS DVD/VCR
_"_O O O_ RF coaxial
Cable _,._, O O O , cable
Signal
TV's
RF coaxial -_ ANTENNA IN
cable _ Jack
Connections
I
Connect a Cable signalto the IN Jack on the Cable Box/DBS.
2
Use an RFcoaxial cable (supplied) to connect the OUT Jack on the Cable
Box/DBS to the ANT-IN (Antenna In) Jack on the DVD/VCR.
3
Use a second RFcoaxial cable to connect the ANT-OUT (Antenna Out) Jackon
the DVD/VCR to the TV's ANTENNA IN Jack.
Recording/Viewing Any Channel
I
With the DVD/VCR on and inVCR position (theVCR light and the VCR/TV light
will appear on the displaypanel), use the CHANNEL Air buttons to set
the DVD/VCR to the Cable Box/DBS output channel (channel 03 or
04). Set the CH3/CH4 switch to the same channel.
2
Set theTV to the same channel to which you set the DVDIVCR.
3
Select the channel you want to view/record at the Cable BoxlDBS.