Filter
Top Products
SpecificTimePlayback57
Starting Playback at a Specific Disc Time
• Before you begin,placethe DVDNCR in DVD mode.
Pressthe DVD/VCR OUTPUT button so that the red DVD light
appears on the front of the DVD/VCR.
I
Press the DVD button, then press the SEARCH MODE
button repeatedly (three times for DVDs or two times for
Audio CDs).
I_b_ EARCHFIIME
TOTAL TIME: lh231_145s
TIME [ h m s]
tart _ Exlq
2
Use the Number buttons to enter the Disc time at which
you want playback to begin.
• Example: I hour, 23 minutes and 30 seconds
I •+10 _+10 '3 •+10 ,+10 ,+10 _0
• To enter zero, press the Number 0 (zero) button or press the
I_ button.
• Make sure the time you enter is within the total time of the
Disc. If it is not, you will have to enter a different time.
• if you make a mistake, press the IP button repeatedly until you
reach the item you need to correct (hour, minute, or second),
then enter the correct information.
I SEARCHFrlME
TOTAL TIME: lh23m45s
TIME [! h05m30s]
Stari _ Exit
PHILIPS
3
Within 30 seconds, press the PLAY button. Playback will
start at the time that you specified.
Helpful Hint
• Specific time playback is not avail-
able with some discs or if MEMO-
RYOFF is activated for a DVD.
Details are on page 52.