Filter
Top Products
BlueBackground49
If you want the TV screen to be solid blue when a weak signalis
received, set BLUE BACKGROUND to ON.The screen will be
blue and the sound will be muted.
Or, if you want to receive the weak signal,set BLUEBACK-
GROUND to OFF.When you select a channel that is receiving a
weak signal,you will see and hear the static in the TV program-
ming.The channel number will not appear on the screen when you
select a weak channel.
To set BLUE BACKGROUND to ON or OFF,follow these steps.
• Beforeyou begin,placethe DVD/VCR inVCR mode. Pressthe
DVD/VCR OUTPUT button so that the greenVCR light appears
on the front of the DVD/VCR. PresstheVCR/TV button so that
theVCR/TV light appearson the front of the DVD/VCR.
I
Press theVCR button, then press the MENU button.
E CT.- CHOOSE1
PROGRAM
VCR SET UP
TUNER SETUP
SET CLOCK
\TO END PUSH EXIT
Press the PLAY button or the STOP button to selectVCR
SET UP, then press the F.FWD button.
S_TTELECTA. CHOOSE I1_ 1
REPEAT pLAy OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
BLUE BACKGROUND ON
O END PUSH EXIT
I IMI_ ,,qr
Cb O
4
PHILIPS
-I
3
Press the PLAY button or the STOP button to select
BLUE BACKGROUND.Then, press the F.FWD button
repeatedly so that OFF (or ON) appears beside BLUE
BACKGROUND.
REPEATPLaY OFF
ON SCREEN MODE
AUDIO OUT
LANGUAGE
--_BLUE BACKGROUND ON
O END PUSH EXIT
4
Press the DISPLAYISTATUSIEXIT button.