Filter
Top Products
42 Real-TimeCounterMemory
Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
Before you begin,place the DVD/VCR inVCR mode.
Pressthe DVD/VCR OUTPUT button so that the greenVCR light
appears on the front of the DVD/VCR.
I
Press theVCR button, then play, fast forward, or rewind a
tape to the location that you would like to refer to later.
Press the STOP button to stop the tape.
Press the DISPLAYISTATUSIEXIT button to see the sta-
tus display.
STOP __
_T 1:08PM
EREO
CHI0
_S_P I :23:45 HIFJ
3
While the status display is on the screen, press the
CLEAR button to reset the real-time counter to zero.
STOPIp 1:08 PM
CHIOTV STEREO
0 O0 O0 HIFI
4
While the real-time counter is on the screen, press the
MEMORY button so that M appears beside the counter.
1:08 PM
TV STEREO CHI0
P M 0:00 : _ HIFI
5
To go to a tape location where the real-time counter was
reset to zero, press the REW(ind) button or the F.FWD
button when playback is stopped.
When the tape reaches the point at which the counter was set to
zero, the tape will stop.
Press the PLAY button to watch the tape.
I
E3 CDCE3
o0o6A
86]
PHILIPS
-3
Helpful Hints
The MEMORY button does not func-
tion if REPEATPLAYis set to ON.
Details are on page 41.
To erase a real-time counter memo-
ry,press the MEMORY button until
the M disappears from the screen.
Youmay onlyset the real-time
counter to zero at one location at a
time. If you set the real-time counter
to zero at a second location,the
previous real-time counter to zero
setting will be erased.